Contact
Pfaffenwaldring 9
70569 Stuttgart
Germany
Room: 1.238
Office Hours
By appointment.
Subject
2024
- Ö. Atmaca et al., “Elastographic Measurements Using Fourier Transform Profilometry for Tissue Differentiation in Oncology,” in DGaO Proceedings 2024, in DGaO Proceedings 2024. Aug. 2024, p. P20. [Online]. Available: https://www.dgao-proceedings.de/download/125/125_p20.pdf
- Ö. Atmaca, J. Liu, T. J. Ly, F. Bajraktari, and P. P. Pott, “Spatial sensitivity distribution assessment and Monte Carlo simulations for needle‐based bioimpedance imaging during venipuncture using the finite element method,” International Journal for Numerical Methods in Biomedical Engineering, May 2024, doi: 10.1002/cnm.3831.
2023
- J. Liu, Ö. Atmaca, and P. P. Pott, “Needle-Based Electrical Impedance Imaging Technology for Needle Navigation,” Bioengineering, vol. 10, no. 5, Art. no. 5, 2023, doi: 10.3390/bioengineering10050590.
- J. Liu, Y. Jeong, T. J. Ly, Ö. Atmaca, I. Park, and P. P. Pott, “Improving Needle Insertion Accuracy with Multi-Local Impedance Sensors on a Needle,” in MikroSystemTechnik Kongress 2023, in MikroSystemTechnik Kongress 2023. VDE, 2023, pp. 65–69. [Online]. Available: https://www.vde-verlag.de/proceedings-de/456203012.html
2022
- J. Liu, Ö. Atmaca, T. J. Ly, and P. P. Pott, “Numerical Sensitivity Analysis of Microelectrodes for Multi-Local Impedance Measurements on Needles,” in Beiträge des 9. GMM-Workshops 21. – 22.11.2022 in Aachen, in Beiträge des 9. GMM-Workshops 21. – 22.11.2022 in Aachen, vol. GMM-Fachbericht 105: Mikro-Nano-Integration. VDE, 2022, pp. 90–94.
- J. Liu, F. Bajraktari, Ö. Atmaca, T. J. Ly, and P. P. Pott, “Microscale Sensor Fabrication on Curved Needle Surfaces,” Current Directions in Biomedical Engineering, vol. 8, no. 2, Art. no. 2, 2022, doi: doi:10.1515/cdbme-2022-1161.
- Since 03/2023
-
Research Assistant at the Institute of Applied Optics, University of Stuttgart
- 11/2022
-
Research Assistant at the Institute for Lasertechnologies in Medicine and Metrology at the University of Ulm
- 06/2021 – 11/2021
-
Internship at Roche Diagnostics Automation Solutions GmbH, Ludwigsburg
- 04/2019 – 10/2022
-
Master of Science "Medical Engineering" at the University of Stuttgart
- 10/2015 – 04/2019
-
Bachelor of Science "Medical Engineering" at the Eberhard Karls University Tübingen & University of Stuttgart